Knowledgebase
I have run MOPEX medfilter to create background-subtracted images for overlap.pl. It took me forever because I used a big window size. I don't want to do it again for mosaic.pl and apex.pl. Is there an easy way to re-use those background-subtracted images
Posted by IRSA HelpDesk on 11 March 2013 01:51 PM
Yes. If a subdirectory name is specified as a full path, it is not treated as a subdirectory of OUTPUT_DIR and the name is used as specified. All you have to do is specify MEDFILTER_DIR to point to the location where the background-subtracted images created by overlap.pl were saved. For example, let's say that in the overlap namelist you have:
OUTPUT_DIR = output_overlap
MEDFILTER_DIR = Medfilter

and you are running overlap.pl and mosaic.pl in the same directory /home/NGC0001/.

In order to re-use the background-subtracted images, you would write in the mosaic namelist:
MEDFILTER_DIR = /home/NGC0001/output_overlap/Medfilter

If you are using the GUI, the output directories can be set in the individual module settings.
(0 vote(s))
This article was helpful
This article was not helpful

Comments (0)